New CFI-I Test Pass4sure | Study Guide CFI-I Pdf
It is browser-based; therefore no need to install it, and you can start practicing for the Certified Fire Inspector I (CFI-1) (CFI-I) exam by creating the Certified Fire Inspector I (CFI-1) (CFI-I) practice test. Our Certified Fire Inspector I (CFI-1) (CFI-I) exam dumps give help to give you an idea about the actual NFPA CFI-I Exam. You can attempt multiple Certified Fire Inspector I (CFI-1) (CFI-I) exam questions on the software to improve your performance.
NFPA CFI-I Exam Syllabus Topics:
Topic
Details
Topic 1
Topic 2
Topic 3
Topic 4
>> New CFI-I Test Pass4sure <<
Study Guide CFI-I Pdf, Hottest CFI-I Certification
It doesn't matter if it is the first time you participate in the c online training or if you prepare this exam for some time. It is a simple and smart way to prepare the CFI-I practice exam with our latest learning materials. There are free demo and valid questions and answers in our CFI-I Pass Guide. If you spend some time and pay attention to CFI-I test answers, there is no reason to not pass test and get the certification.
NFPA Certified Fire Inspector I (CFI-1) Sample Questions (Q89-Q94):
NEW QUESTION # 89
What is the minimum required total stair width in a non-sprinklered hotel with an occupancy capacity of 650?
Answer: C
Explanation:
Comprehensive and Detailed Step-by-Step Explanation:
Egress Width Calculation:
According to NFPA 101 (Life Safety Code), Section 7.3.3.1, for non-sprinklered occupancies, the required stair width is 0.3 inches per occupant.
Calculation:
Occupancy capacity = 650 people
Required stair width = 0.3in.×650=195inches0.3 , ext{in.} imes 650 = 195 , ext{inches}0.3in.×650=195inches.
Other Options Explained:
Option A (130 in): Too small for 650 occupants.
Option C (217 in): Exceeds the requirement.
Option D (455 in): Far exceeds the requirement.
Summary:
The minimum required total stair width for a non-sprinklered hotel with an occupancy capacity of 650 is 195 inches.
NEW QUESTION # 90
How often must a hose valve on a hose station attached to a sprinkler system and Class II standpipe system be tested?
Answer: D
Explanation:
Comprehensive and Detailed Step-by-Step Explanation:
Testing Requirements for Hose Valves:
Hose valves in Class II standpipe systems and sprinkler systems are critical components for fire protection.
NFPA 25 (Standard for the Inspection, Testing, and Maintenance of Water-Based Fire Protection Systems), Section 6.3.1 requires hose valves to be tested annually to ensure proper operation and water flow.
Why Annual Testing is Required:
Regular testing ensures the valves function correctly in case of an emergency.
Annual testing helps identify potential issues such as leaks, corrosion, or improper operation.
Other Options Explained:
Option B (Every two years), Option C (Every three years), Option D (Every four years):
These frequencies do not meet the minimum requirements stated in NFPA 25 for hose valves on standpipe and sprinkler systems.
Summary:
Hose valves on a Class II standpipe system and sprinkler systems must be tested annually per NFPA 25 to ensure operational readiness.
NEW QUESTION # 91
What is the color of the glass bulb in a 155°F (66°C) temperature-rated sprinkler head?
Answer: C
Explanation:
The color of the glass bulb in sprinkler heads indicates the temperature rating at which the bulb will activate. These colors are standardized under NFPA 13:
155°F (66°C) temperature-rated sprinklers are classified as Ordinary temperature range, and the glass bulb is typically orange or red.
The colors correspond to the following:
Orange/Red: 135°F-155°F (57°C-68°C)
Yellow/Green: 175°F-225°F (79°C-107°C)
Blue: 250°F-300°F (121°C-149°C)
Purple: 325°F-375°F (163°C-191°C)
Reference:
NFPA 13, Table 7.2.2.1: Sprinkler temperature ratings and corresponding bulb colors.
NEW QUESTION # 92
What is the maximum volume of Class I, Class II, and Class III A liquids allowed to be stored in an individual storage cabinet?
Answer: C
Explanation:
The maximum volume of flammable and combustible liquids permitted in an individual storage cabinet is addressed by NFPA 30, Flammable and Combustible Liquids Code. Specifically:
Class I liquids are flammable liquids with flashpoints below 100°F (37.8°C).
Class II and IIIA liquids are combustible liquids with higher flashpoints but still pose significant fire hazards when improperly stored.
According to NFPA 30, Section 9.5.2, the maximum allowable quantity of Class I, II, and IIIA liquids in a storage cabinet is 120 gallons (460 liters).
Why 120 gallons?
The 120-gallon limit is determined based on:
The need to minimize fire risk and contain potential ignition sources.
Storage cabinets are designed to limit vapor emissions and resist fire exposure for a minimum duration (e.g., 10 minutes per OSHA standards).
Additional Considerations:
Cabinets must meet construction requirements outlined in NFPA 30, Chapter 9 (e.g., self-closing doors, ventilation, and fire resistance).
Exceeding the 120-gallon limit would require additional fire safety measures or a different storage approach (e.g., a flammable liquid storage room).
Reference:
NFPA 30, Flammable and Combustible Liquids Code, Section 9.5.2
OSHA 1910.106(d)(3): Storage requirements for flammable and combustible liquids.
NEW QUESTION # 93
Which of the following statements regarding equivalencies is correct?
I . Equivalencies may result in the provision of less protection than the applicable code requirements with the approval of the AHJ.
II . Buildings with alternate fire protection features that are approved by the AHJ are considered to be in compliance with the fire code.
III . Applications for consideration of an alternate fire protection feature must be accompanied by the documentation necessary to support the request.
Answer: C
Explanation:
NFPA 1 and NFPA 101 permit equivalencies when alternate fire protection features provide equal or greater safety than the prescriptive code requirements:
II (Buildings with approved alternate features): Such buildings are considered compliant if the AHJ approves the equivalency.
III (Supporting documentation): Applications must include sufficient documentation to justify the alternate design.
I (Provision of less protection): This is incorrect; equivalencies must maintain or exceed the level of protection required by the code.
Reference:
NFPA 1, Section 1.4: Equivalency provisions.
NEW QUESTION # 94
......
Our latest CFI-I vce braindumps are written by our IT experts' wealth of knowledge and experience and can fully meet the demand of CFI-I real exam. From related websites or books, you might also see some NFPA free download study materials, but our CFI-I Exam crams are affordable, latest and comprehensive.
Study Guide CFI-I Pdf: https://www.prepawayexam.com/NFPA/braindumps.CFI-I.ete.file.html
Learning often happens in classrooms but it doesn’t have to. Skilling towards Excellence through Online Learning.
Learn Data Science and Operational Excellence Courses from the experts.
© Copyright 2024 All right reserved by Stat Modeller