Clear Epoxy Resin | 6kg | For Crafts, Artwork, Wood, Creative Wooden Tables, Art Jewelry, Creative Crafts, DIY (2x3 Kilos)

CAPSULE is the epoxy resin of AEPOXY's professional range for artists and jewelers. This AEPOXY product has a specific formulation for jewelry, encapsulated and working with molds and manual-dades. A great alternative to multi-purpose epoxy resins. Encapsulate small items to create memories or create beautiful keychains, pendants, rings and other original craft items. Features: ready-to-use dilution. Mixing time: 1 h and 30 min. Mixing ratio 100:60 (100 component A/ 60 component B) layers from 1 mm to 2 cm. Dry to the touch 6 – 12 hours. Handling after 24 hours. Maximum hardness between 48 and 72 hours. Enhanced Strength for Jewelry & Crafts - Increased resistance to skin friction, moisture and mechanical and chemical resistance. Suitable for dyes (0.1-2%). How to use: 1. Perform all the mixing and application stages in a dry environment with a tempering interval between 19 and 27°C. Because epoxy resins are very sensitive to environmental humidity. 2. Prepare only the amount to be applied to prevent the rest of the liquid from hardening. 3. Mix component A (resin) with component B (catalyst). To do this, keep in mind that the mixing ratio is 100/60 parts by weight. 4. Homogenize the mixture for 5 minutes before application. Attention: Any surface that comes into contact with the mixture must be dry and clean of dust, grease, particles, etc. 5. Once the mixture has been made and homogenized, proceed to melt or paint the piece carefully. Pack of 6. If surface bubbles appear, apply a stream of hot air with a hair dryer to help peel off. The heat draws the hot air to the surface. Warning: Humidity, temperature, groove thickness, dyes used or in the type of support, may cause variations in drying, yield or other properties.

• Specific formulation for jewelry, encapsulations, molds, decorative tables and crafts, it is a versatile alternative to multi-purpose epoxy resins. Encapsulate small items to create original keepsakes, keychains, pendants, rings and crafts.
• Dilution: ready to use | mixing time: 1 hour 30 minutes. Mixing ratio 100:60 (A:B) 1mm to 2cm layers Dry to the touch in 6-12h | Handled in 24h. Maximum hardness in 48-72h. Improved strength for jewelry and crafts: increased resistance to friction, moisture, mechanical and chemical resistance. Supports dyes (0.1-2%).
• How to use: 1. Make mixing and application in dry environment, temperature between 19º and 27º C. 2. Prepare only the amount to apply to avoid hardening. Mixture A (resin) with B (catalyst) in proportion 100/60 parts by weight. 4. Homogenize the mixture for 5 minutes before applying. 5. The surface in contact must be dry and clean. 6.Pour or paint the piece carefully.
• 7. In case of bubbles, apply hot air stream with blow dryer to deair. Warning: Variations in drying, performance or other properties may occur due to differences in humidity, temperature, groove thickness, dyes or type of support.